Open Access Open Access  Restricted Access Subscription Access

Analyzing the Mechanical Properties of Thermoplastic Reinforced with Natural Fibers

NIDHI M. THANKI, ABIGAIL HENDERSON, JOE FEHRENBACH, CHAD ULVEN, ALI AMIRI

Abstract


Synthetic fibers such as glass, carbon, etc., are used as reinforcement in polymer composites due to their high strength and modulus. However, synthetic fibers contribute to high costs and have a significant environmental impact. To overcome this challenge, various natural fibers, including banana, kenaf, coir, bamboo, hemp, and sisal fiber, as reinforced in a polymer matrix are investigated for mechanical properties. In this study, biocomposites with natural fibers as reinforced are developed and characterized. Treated and untreated natural fibers such as flax, maple, and pine as reinforced in thermoplastic, in this study, polypropylene (PP), are investigated for the mechanical properties, including tensile, flexural, and impact test. Mechanical test results exhibited that adding the natural fibers enhanced the tensile, flexural, and impact properties. It can be inferred that these biocomposites can be used as potential materials for the automobile industry.


DOI
10.12783/asc36/35904

Full Text:

PDF

References


2017, “Fiber Reinforced Polymer (FRP) Composites Market Analysis By Fiber Type (Glass,

Carbon, Basalt, Aramid), By Application (Automotive, Construction, Electronic, Defense),

By Region, And Segment Forecasts, 2018 - 2025,†Mark. Anal. Rep., p. 95.

Reingruber, E., Reussner, J., Sauer, C., Standler, A., and Buchberger, W., 2011, “Studies on

the Emission Behavior of Polypropylene by Gas Chromatography/Mass Spectrometry with

Static Headspace or Thermodesorption,†J. Chromatogr. A, 1218(21), pp. 3326–3331.

Chen, J. Y., Müller, D. H., König, C., Nießen, K., and Müssig, J., 2010, “Spunlaced

Flax/Polypropylene Nonwoven as Auto Interior Material: Acoustical and Fogging

Performance,†J. Biobased Mater. Bioenergy, 4(4), pp. 330–337.

Birat, K. C., Panthapulakkal, S., Kronka, A., Agnelli, J. A. M., Tjong, J., and Sain, M., 2015,

“Hybrid Biocomposites with Enhanced Thermal and Mechanical Properties for Structural

Applications,†J. Appl. Polym. Sci., 132(34), pp. 1–8.

N E Naveen, P., and Yasaswi, M., 2013, “Experimental Analysis of Coir-Fiber Reinforced

Polymer Composite Materials,†Int. J. Mech. Eng. Rob. Res, 2(1), pp. 10–18.

Taylor, C., Amiri, A., Paramarta, A., Ulven, C., and Webster, D., 2017, “Development and

Weatherability of Bio-Based Composites of Structural Quality Using Flax Fiber and

Epoxidized Sucrose Soyate,†Mater. Des., 113, pp. 17–26.

Christian, S. J., 2019, “Natural Fibre-Reinforced Noncementitious Composites

(Biocomposites),†Nonconventional and Vernacular Construction Materials:

Characterisation, Properties and Applications, pp. 169–187.

Amiri, A., Hosseini, N., and Ulven, C. A., 2015, “Long-Term Creep Behavior of Flax/Vinyl

Ester Composites Using Time-Temperature Superposition Principle,†J. Renew. Mater.,

(3), pp. 224–233.

Radkar, S. S., Amiri, A., and Ulven, C. A., 2019, “Tensile Behavior and Diffusion of

Moisture through Flax Fibers by Desorption Method,†Sustain., 11(13), pp. 1–10.

Chandramohan, D., and Marimuthu, K., 2011, “A Review on Natural Fibers,†Int. J. Res.

Rev. Appl. Sci., 8(2), pp. 194–206.

Koohestani, B., Darban, A. K., Mokhtari, P., Yilmaz, E., and Darezereshki, E., 2019,

“Comparison of Different Natural Fiber Treatments: A Literature Review,†Int. J. Environ.

Sci. Technol., 16(1), pp. 629–642.

Tajvidi, M., Falk, R. H., and Hermanson, J. C., 2006, “Effect of Natural Fibers on Thermal

and Mechanical Properties of Natural Fiber Polypropylene Composites Studied by Dynamic

Mechanical Analysis,†J. Appl. Polym. Sci., 101(6), pp. 4341–4349.

Amiri, A., Ulven, C. A., and Huo, S., 2015, “Effect of Chemical Treatment of Flax Fiber and

Resin Manipulation on Service Life of Their Composites Using Time-Temperature

Superposition,†Polymers (Basel)., 7(10), pp. 1965–1978.

AlMaadeed, M. A., Kahraman, R., Noorunnisa Khanam, P., and Madi, N., 2012, “Date Palm

Wood Flour/Glass Fibre Reinforced Hybrid Composites of Recycled Polypropylene:

Mechanical and Thermal Properties,†Mater. Des., 42, pp. 289–294.

Azwa, Z. N., Yousif, B. F., Manalo, A. C., and Karunasena, W., 2013, “A Review on the

Degradability of Polymeric Composites Based on Natural Fibres,†Mater. Des., 47, pp. 424–

John, M. J., and Thomas, S., 2008, “Biofibres and Biocomposites,†Carbohydr. Polym.,

(3), pp. 343–364.

Garkhail, S. K., Heijenrath, R. W. H., and Peijs, T., 2000, “Mechanical Properties of

Natural-Fibre-Mat -Reinforced Thermoplastics Based on Flax Fibres and Polypropylene,â€

Appl. Compos. Mater., 7(5–6), pp. 351–372.

van den Oever, M. J. A., Bos, H. L., and van Kemenade, M. J. J. M., 2000, “Influence of the

Physical Structure of Flax Fibres on the Mechanical Properties of Flax Fibre Reinforced

Polypropylene Composites,†Appl. Compos. Mater., 7(5–6), pp. 387–402.

Ray, D., Sarkar, B. K., Rana, A. K., and Bose, N. R., 2001, “Effect of Alkali Treated Jute

Fibres on Composite Properties,†Bull. Mater. Sci., 24(2), pp. 129–135.

Morrison, W. H., Archibald, D. D., Sharma, H. S. S., and Akin, D. E., 2000, “Chemical and

Physical Characterization of Water- and Dew-Retted Flax Fibers,†Ind. Crops Prod., 12(1),

pp. 39–46.

Van de Weyenberg, I., Ivens, J., De Coster, A., Kino, B., Baetens, E., and Verpoest, I., 2003,

“Influence of Processing and Chemical Treatment of Flax Fibres on Their Composites,â€

Compos. Sci. Technol., 63(9), pp. 1241–1246.

Mishra, S., Mohanty, A. K., Drzal, L. T., Misra, M., Parija, S., Nayak, S. K., and Tripathy,

S. S., 2003, “Studies on Mechanical Performance of Biofibre/Glass Reinforced Polyester

Hybrid Composites,†Compos. Sci. Technol., 63(10), pp. 1377–1385.

ASTM International, “ASTM D638-10 : Standard Test Method for Tensile Properties of

Plastics.â€

ASTM International, 2017, ASTM D790-17 Standard Test Methods for Flexural Properties

of Unreinforced and Reinforced Plastics and Electrical Insulating Materials., West

Conshohocken, PA.

ASTM International, 2018, ASTM D256-18 Standard Test Methods for Determining the Izod

Pendulum Impact Resistance of Plastics, West Conshohocken, PA.

Matuana, L. M., and Stark, N. M., 2015, The Use of Wood Fibers as Reinforcements in

Composites.

Pérez, E., Famá, L., Pardo, S. G., Abad, M. J., and Bernal, C., 2012, “Tensile and Fracture

Behaviour of PP/Wood Flour Composites,†Compos. Part B Eng., 43(7), pp. 2795–2800.

Stark, N. M., and Rowlands, R. E., 2003, “Effects of Wood Fiber Characteristics on

Mechanical Properties of Wood/Polypropylene Composites,†Wood Fiber Sci., 35(2), pp.

–174.


Refbacks

  • There are currently no refbacks.